Spray Facility Servicing
Spray booths and related facilities require regular servicing and scheduled maintenance to ensure optimal performance. Proper maintenance of spray booths and fluid handling equipment is essential for achieving the best application results. Regular testing and certification are necessary to meet HSE regulations and will also avoid costly downtime caused by insufficient servicing and rejects due to dust and debris not been correctly filtered.
At Airblast Eurospray, our technicians and engineers specialise in delivering high-quality, reliable, and efficient service for spray booths & fluid handling equipment. We provide calibration, servicing, repair of spray equipment and PPE, either on-site or at our facility. We also ensure full compliance by testing and maintaining spray equipment in accordance with the latest regulatory standards.
We offer total servicing, maintenance, and inspection for spray booths, anywhere in the UK.
- PPE inspections for suits and half-mask respirators
- RPE servicing and maintenance for breathing air filtration units
- Spray application equipment servicing, calibration, and repair
- Spray application equipment pressure testing, mechanical testing, and visual inspection
Scheduled Maintenance and calibration
Maintaining spray equipment and spray booths is essential to comply with legislation and regulations, including (The Pressure Equipment (Safety) Regulations 2016 (PE(S)R / Pressure Systems Safety Regulations 2000 (PSSR). Routine maintenance and calibration are required to keep your equipment in safe working order and ensure all test documentation is current. Our technicians and engineers follow strict inspection procedures to ensure your equipment is safe and meets all legal requirements.
Trained to the highest standards, our team ensures that your equipment is properly maintained and dependable when you need it most.
Recommended Inspection Schedules
Inspection, servicing, and testing are vital for workplace safety and efficiency. Whatever your requirements, thanks to our exacting inspection and testing procedures, you can trust that you’re in safe hands.
Airless & Air combi Sprayers
We recommend servicing your spray equipment inside your spray booth quarterly if you use high-performance coatings daily. For those applying standard interior/exterior coatings fortnightly, a bi-annual service is advised. If you only use standard coatings monthly, an annual service is sufficient.
Our standard spray equipment servicing includes:
- Initial electrical test and visual inspection
- Mechanical visual inspection
- Initial run-up of the unit to ascertain its capabilities
- Pump, manifold, gun & hose removal & inspection
- Motor spin test & control board test
- Cleaning of all parts including cart, stand & covers
- Preparation of workshop report if additional work is required
- Reassembly using new parts
- Electrical PAT Test* we will offer this in near future
- Mechanical test including high-pressure test and visual inspection
Airline Breathing Equipment
As per HSE regulations, breathing air tests MUST be carried out every 400 hours or every three months, whichever occurs first. These tests are a legal requirement for manufacturers and contractors operating in hazardous environments. Breathing contaminated air from an airline-fed blast helmet can pose serious health risks. Additionally, employers have a duty of care to ensure these tests are conducted to protect their employees.
Gas detectors
Gas monitors, like GVS RPB GX4, require calibration after prolonged usage. This can be anywhere from 6 months to 2 years, depending on the gas monitor. Check the manufacturer to find out how often yours needs calibration, or if it fails a bump test, send it to us for service.
Air Compressors
For best practice, air compressors should be serviced annually or every 2,000 hours, whichever comes first, determined by activity levels. Airblast can offer servicing for various brands, including Hertz, Atlas Copco, and Abac.
Expert support
Our skilled team of engineers and technicians possesses comprehensive expertise in all facets of spray coating and surface treatment, including testing and servicing. To demonstrate their proficiency, they undergo rigorous training and frequent audits. For additional reassurance, all our technicians and engineers have full support from our technical teams.
Call us today on 01778 560650 to book your servicing, inspection, or test; alternatively, email us below.
